Wolo 340 Bull Horn Manuale Utente Scaricare il pdf

Installing the Bull Horn™

1. Install the Bull Horn™ in the engine compartment. Place in an area that is

dry and forward of the engine to minimize heat.

2. Place the horn on downward angle to prevent water from entering the

trumpet. Using the horn's mounting bracket as a template mark the two (2)

bracket holes. Drill the marked locations, be sure you clear hoses and wire

cable. Secure to vehicle using the bolts, washers and nuts provided.

WIRING

1. IMPORTANT - For best performance, connect red wire from the Bull Horn™

to a heavy duty switch. (Switch not included). See Fig. A.

2. Connect the other terminal of the switch to a positive (+) 12 volt source of

power - battery, alternator, fuse block, etc. Use at least 16 gauge wire. To

protect your horn purchase, if the 12 volt circuit being used for power is not

fused, install a 25 ampere fuse into this wire.

NOTE: If horn is mounted (secured) on plastic a ground wire is needed.

See Fig.

To ground

if horn is not

mounted

on metal.

amp. fuse

(not included)

+12

battery.

alternator,

etc.

Installing the Bull Horn™ 1

Sommario

Pagina 1 - Installing the Bull Horn™

Installing the Bull Horn™1. Install the Bull Horn™ in the engine compartment. Place in an area that isdry and forward of the engine to minimize heat.2

Commenti su questo manuale

Nessun commento

Wolo 340 Bull Horn Manuale Utente

Navigare online o scaricare Manuale Utente per Apparecchiature Wolo 340 Bull Horn. Wolo 340 Bull Horn User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature Wolo 340 Bull Horn